![]() ![]() Press E to set the baud rate, the baud rate needs to be set 115200 Note that minicom's default configuration file save requires sudo permission, so use sudo minicom -s ![]() Do not know how to search using the search tool. # Then set the serial port number according to the prompt and the baud rate is 115200. If the device is not found, you need to confirm if the driver is installed and if the contact is good. Under Windows, you can open Device Manager to view Under Linux can ls /dev/ttyUSB* or ls /dev/ttyACM* to see, if not you can ls /dev come look for the specific device name with the relevant serial chip and drive Connecting hardwareĬonnect the Type C cable, one end of the computer development boardĬheck to see if the device has been properly identified: Power up the device, first time setup with MaixPy 1. Power up the device, first time setup with MaixPy.Upload the script to the development board ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |